{"id":1742,"date":"2026-07-17T06:30:50","date_gmt":"2026-07-17T06:30:50","guid":{"rendered":"https:\/\/gearrack.top\/product\/plastic-gears\/"},"modified":"2026-07-17T06:30:55","modified_gmt":"2026-07-17T06:30:55","slug":"plastic-gears","status":"publish","type":"product","link":"https:\/\/gearrack.top\/fr\/product\/plastic-gears\/","title":{"rendered":"Plastic Gears"},"content":{"rendered":"
\n

<\/p>\n

Product Overview<\/h2>\n
\n
\n \"Plastic\n <\/div>\n
\n

As the name suggests, plastic gears<\/strong> are made of plastic instead of metal. These include worm gears, spur gears, helical gears, pinion gears, bevel gears, and planetary gears. The material is typically POM (Polyoxymethylene \/ Duracon \/ Acetal) or MC Nylon (PA6 cast polyamide) \u2014 two engineering plastics whose combination of self-lubrication, corrosion resistance, low friction, and good formability makes them the dominant materials for plastic gear production worldwide. Korea Ever-Power’s plastic gear programme covers all five major gear types in POM and Nylon, with custom module range M0.1\u2013M2.0 for injection-moulded micro gears and up to M16 for CNC-machined large MC Nylon gears.<\/p>\n

Korea Ever-Power’s plastic gears<\/a> can quickly be produced in various shapes, are relatively inexpensive, produce lower noise than metal gears, have a low friction coefficient for wear resistance, are lightweight, corrosion-resistant, and self-lubricating. Used extensively in power transmission and motion control systems across office automation, consumer electronics, medical equipment, food processing, and industrial machinery. Custom gears per client specification \u2014 handmade\/machined before mould making so tests can be done first.<\/p>\n<\/p><\/div>\n<\/div>\n

<\/p>\n

\n
\"Plastic<\/p>\n

Spur Gears<\/p>\n<\/div>\n

\"Plastic<\/p>\n

Helical Gears<\/p>\n<\/div>\n

\"Plastic<\/p>\n

Worm Gears<\/p>\n<\/div>\n

\"Plastic<\/p>\n

Engrenages coniques<\/p>\n<\/div>\n

\"Plastic<\/p>\n

Internal Gears<\/p>\n<\/div>\n

\"Custom<\/p>\n

Custom All Types<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Technical Specifications \u2014 Five Plastic Gear Types<\/h2>\n
\n\n\n\n\n\n\n\n\n\n
Taper<\/th>\nModule<\/th>\nMat\u00e9riel<\/th>\nBore (mm)<\/th>\nOD (mm)<\/th>\nFace Width (mm)<\/th>\n<\/tr>\n<\/thead>\n
Plastic Spur Gear<\/td>\nM0.1\u2013M2.0<\/td>\nPOM \/ Nylon<\/td>\n\u00d81.40\u2013\u00d83.05 flexible<\/td>\n\u00d82.0\u2013\u00d8100.0 flexible<\/td>\n2.0\u201310.0 flexible<\/td>\n<\/tr>\n
Plastic Helical Gear<\/td>\nM0.1\u2013M2.0<\/td>\nPOM \/ Nylon<\/td>\n\u00d81.40\u2013\u00d83.05 flexible<\/td>\n\u00d810.0\u2013\u00d850.0 flexible<\/td>\n2.0\u201310.0 flexible<\/td>\n<\/tr>\n
Plastic Worm Gear<\/td>\nM0.2\u2013M2.0<\/td>\nPOM \/ Nylon<\/td>\n\u00d81.40\u2013\u00d81.90<\/td>\n\u00d84.0\u2013\u00d86.0 flexible<\/td>\n6.0\u201310.0 flexible<\/td>\n<\/tr>\n
Plastic Pinion Gear<\/td>\nM0.1\u2013M2.0<\/td>\nPOM \/ Nylon<\/td>\n\u00d81.40\u2013\u00d83.05 flexible<\/td>\n\u00d82.0\u2013\u00d850.0 flexible<\/td>\n2.0\u201310.0 flexible<\/td>\n<\/tr>\n
Plastic Bevel Gear<\/td>\nM0.1\u2013M2.0<\/td>\nPOM \/ Nylon<\/td>\n\u00d81.40\u2013\u00d82.90 flexible<\/td>\n\u00d83.0\u2013\u00d8100.0 flexible<\/td>\n4.0\u201320.0 flexible<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

Plastic Gear Materials \u2014 POM vs MC Nylon<\/h2>\n

\"Self-lubricating<\/p>\n

Most plastic gears today are made from either POM (also known by trade name Duracon, milky white colour) or MC Nylon (blue colour, polyamide PA6 resin). Understanding the differences is essential for correct material selection:<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Property<\/th>\nPOM (Duracon \/ Acetal)<\/th>\nMC Nylon (PA6 cast)<\/th>\n<\/tr>\n<\/thead>\n
Colour (typical)<\/td>\nMilky white \/ black<\/td>\nNatural (cream) \/ blue (oil grade) \/ green (oil grade)<\/td>\n<\/tr>\n
Forming method<\/td>\nInjection moulding (into gear-shape die)<\/td>\nCasting (rod\/disc\/block) then CNC cutting<\/td>\n<\/tr>\n
Best for size<\/td>\nSmall gears, mass production<\/td>\nLarge gears, small lot production<\/td>\n<\/tr>\n
Water absorption<\/td>\nVery low (~0.2%) \u2713<\/td>\nModerate (~2\u20133%) \u2014 absorbs ~10\u00d7 more than POM<\/td>\n<\/tr>\n
Dimensional stability<\/td>\nExcellent \u2713 \u2014 better for humid environments<\/td>\nGood dry; changes with moisture<\/td>\n<\/tr>\n
Bending strength<\/td>\n~90 MPa<\/td>\n~110 MPa (~1.2\u00d7 POM) \u2713<\/td>\n<\/tr>\n
Friction coefficient<\/td>\nVery low (\u03bc \u2248 0.1) \u2713<\/td>\nLow (\u03bc \u2248 0.2\u20130.3; oil grade lower)<\/td>\n<\/tr>\n
Max temperature<\/td>\n~90\u00b0C continuous<\/td>\n~100\u00b0C continuous<\/td>\n<\/tr>\n
Oil-containing grade<\/td>\nNot standard<\/td>\nYes \u2014 green oil-containing MC Nylon \u2713<\/td>\n<\/tr>\n
Best application<\/td>\nOffice automation, precision instruments, humid environments<\/td>\nHeavy industrial drives, large star wheels, high-load gears<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

<\/p>\n

Gear Fundamentals \u2014 How Plastic Gears Transmit Power<\/h2>\n

\"Ever-Power<\/p>\n

A gear is a toothed wheel designed to transmit force to another toothed component. Gears of differing sizes are used in pairs for mechanical advantage \u2014 the torque of the driving gear produces a larger torque in the driven gear at lower speed, or a smaller torque at higher speed, depending on the tooth count ratio. The fundamental gear law requires that the ratio of the angular velocities of two meshing gears equals the inverse ratio of their tooth counts: \u03c9\u2081\/\u03c9\u2082 = Z\u2082\/Z\u2081. Plastic gears obey this law exactly \u2014 like their metal counterparts \u2014 while adding the unique advantages of self-lubrication, corrosion resistance, lightweight, and low noise.<\/p>\n

\n
\n

Speed and Torque Conversion<\/h3>\n

When a small driving gear (Z\u2081 teeth) meshes with a larger driven gear (Z\u2082 teeth), the speed ratio is Z\u2081:Z\u2082 \u2014 the output shaft rotates more slowly by the ratio Z\u2081\/Z\u2082, while the output torque increases by Z\u2082\/Z\u2081 (minus friction losses of typically 1\u20134% per mesh for plastic gears). This torque multiplication is the fundamental reason gears are used in power transmission \u2014 a small motor can drive a large load by using an appropriate gear ratio to reduce speed and multiply torque.<\/p>\n<\/p><\/div>\n

\n

Lubrication of Plastic Gears<\/h3>\n

No lubricant is generally necessary for POM or MC Nylon plastic gears \u2014 these smooth, low-friction materials can run dry in clean environments. When lubrication is required at higher loads, only non-polar synthetic hydrocarbon oils should be used \u2014 not standard mineral oils for metal gears. Polar lubricants get into the plastic molecular chain structure, causing swelling (molecules of oil wedge between plastic molecules under pressure) and deterioration. Korea Ever-Power advises on correct lubrication selection for each plastic gear application.<\/p>\n<\/p><\/div>\n

\n

Injection Moulding vs Cutting<\/h3>\n

POM plastic gears are formed by injection moulding \u2014 heated, melted resin is injected into a gear-shaped die at high pressure. This gives direct gear tooth form with minimal secondary machining, making it cost-effective for high-volume small gear production. Plastic has lower cure shrinkage than metal, enabling high dimensional accuracy directly from the mould. For large gears or small lots, MC Nylon is cast into blocks then cut on a CNC gear hobbing machine \u2014 like a metal gear but without heat treatment requirements.<\/p>\n<\/p><\/div>\n

\n

Recommended Use Environment<\/h3>\n

Plastic gears are most suitable for drive systems in office automation equipment, loaders for electric goods, consumer electronics, and toys \u2014 where gear strength requirement is modest, noise must be low, and the self-lubricating, corrosion-resistant properties of plastic are advantageous. Plastic gears should not replace metal gears in high-torque, high-temperature, or shock-load applications where the higher strength and thermal stability of alloy steel gears are required. Korea Ever-Power helps customers select the correct gear material for each application.<\/p>\n<\/p><\/div>\n<\/div>\n

<\/p>\n

Seven Advantages of Plastic Gears Over Metal<\/h2>\n

\"measuring<\/p>\n

\n
\n

\u2460 Wide Shape Variety<\/h3>\n

Plastic gears can quickly be produced in various complex shapes that would require expensive multi-operation machining in metal. The injection moulding process fills the die completely \u2014 producing complex integrated features (boss, ribs, snap-fit clips) in a single operation at no extra cost. This gives plastic gears a far wider range of configurations than metal gears at equivalent production cost.<\/p>\n<\/div>\n

\n

\u2461 Lower Cost<\/h3>\n

Plastic gears are relatively cheap \u2014 the injection moulding process produces finished gears directly from the die at low per-part cost at volume, without the secondary operations (hobbing, heat treatment, grinding) required for metal gears. The tooling investment for injection moulds is amortised over high production volumes, giving the lowest possible cost for mass-produced small gears.<\/p>\n<\/div>\n

\n

\u2462 Low Noise<\/h3>\n

Plastic gears produce lower noise than metal gears at the same speed and load \u2014 typically 5\u201315 dB(A) quieter. This noise reduction comes from two sources: the high internal damping of engineering plastics (which absorbs vibrational energy from tooth mesh impacts as heat rather than sound), and the lower elastic modulus of plastic (which smooths the load impulse during tooth engagement \u2014 the primary source of gear mesh noise).<\/p>\n<\/div>\n

\n

\u2463 Wear Resistance<\/h3>\n

Both POM and MC Nylon have low friction coefficients and good abrasion resistance in dry running conditions \u2014 making them resistant to wear and tear in the typical light-to-moderate duty cycles of office automation and consumer electronics applications. MC Nylon’s oil-containing grade further reduces tooth flank wear by providing continuous boundary lubrication from the oil dispersed in the nylon matrix.<\/p>\n<\/div>\n

\n

\u2464 Lightweight<\/h3>\n

POM density: 1.41 g\/cm\u00b3; MC Nylon: 1.15 g\/cm\u00b3 \u2014 compared with steel at 7.85 g\/cm\u00b3. A plastic gear is 5\u20137\u00d7 lighter than the equivalent steel gear, reducing the inertia load on the motor and enabling faster acceleration\/deceleration in servo-controlled drive systems. This weight reduction is particularly valuable in portable devices, robotic end-effectors, and aerospace applications where every gram matters.<\/p>\n<\/div>\n

\n

\u2465 Corrosion Resistance<\/h3>\n

Plastic gears are completely immune to rust and unaffected by most acids, alkalis, and salt solutions that corrode carbon steel gears. This makes plastic gears the preferred choice for food processing equipment (washed with acidic or alkaline cleaning agents), marine environment applications (salt spray), and chemical industry machinery (corrosive fluid contact). No surface coating or plating is required to maintain corrosion resistance \u2014 it is inherent in the material.<\/p>\n<\/div>\n

\n

\u2466 Self-Lubrication<\/h3>\n

POM and Nylon plastic gears are inherently self-lubricating \u2014 they can run dry without grease or oil in light-to-moderate duty applications, eliminating the lubrication maintenance requirement that metal gears impose. No oil bath or grease filling is needed, making plastic gears suitable for clean environments including food contact, medical equipment, and sealed mechanisms where access for re-greasing is not possible.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Applications<\/h2>\n

\"Ever-Power<\/p>\n

\n
\n
\ufe0f<\/div>\n

Office Automation<\/h3>\n

Laser printers, copiers, scanners, fax machines \u2014 POM spur and helical gears in paper feed, registration, and output drives where self-lubrication, noise reduction, and dimensional precision over millions of cycles are essential. The Delrin 500P example: M0.7 double gear (24T + 52T), 6.47 g, for printer multifunction drives.<\/p>\n<\/div>\n

\n
<\/div>\n

Consumer Electronics<\/h3>\n

Digital cameras (zoom lens drive), CD\/DVD drives (disc tray and reading mechanism), IP cameras (pan\/tilt drive gear M0.6, 16T D-hole helical POM gear). Plastic gears meet requirements for miniature size (M0.1\u2013M0.5), low noise in quiet home environments, and the lightweight construction essential in portable devices.<\/p>\n<\/div>\n

\n
<\/div>\n

Medical Equipment<\/h3>\n

Stepper motor drive gears for infusion pump mechanisms, laboratory analyser sample positioning drives, and diagnostic equipment. Medical plastic gears require biocompatible materials (POM is FDA-listed), freedom from metallic contamination (no lubrication needed), and consistent batch-to-batch dimensional accuracy for repeatable dosing or positioning.<\/p>\n<\/div>\n

\n
\ufe0f<\/div>\n

Vending Machines and Food Equipment<\/h3>\n

Plastic gears in vending machine dispensing mechanisms, coffee grinders, food processors, and household appliances. The corrosion resistance and food-contact safety of POM gears make them suitable for these environments \u2014 no metallic contamination risk from gear wear, no lubricant contamination of food products, and easy cleaning with food-safe detergents.<\/p>\n<\/div>\n

\n
<\/div>\n

Toys and Consumer Products<\/h3>\n

ABS and Nylon gears in battery-powered toys, RC vehicles, and educational robots. Plastic gears in toys must meet stringent safety standards (no sharp edges, no heavy metals, no toxic materials) that are inherently satisfied by engineering plastic materials. The low per-part cost of injection-moulded gears makes them the natural choice at toy industry price points and production volumes of millions per year.<\/p>\n<\/div>\n

\n
\u231a<\/div>\n

Watches and Precision Instruments<\/h3>\n

Fine-pitch POM gears (M0.1\u2013M0.3) in mechanical watch movement components, timer drives, and precision counting mechanisms. At these very small module sizes, plastic’s low density and good mouldability allow tooth forms that would be impractical to machine in metal at equivalent cost. The long-term dimensional stability of POM in constant-temperature indoor environments matches the stability requirements of precision timekeeping mechanisms.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Frequently Asked Questions<\/h2>\n
\n
\n

Should I choose POM or MC Nylon for my plastic gear?<\/p>\n

Choose POM when: the gear is small (injection-mouldable), the environment is humid or wet (POM absorbs only 0.2% water vs MC Nylon’s 2\u20133%), and dimensional precision over a range of moisture conditions is critical. Choose MC Nylon when: the gear is large (economically cut from cast MC Nylon block), high load or bending strength is required (MC Nylon is ~1.2\u00d7 stronger than POM), or the oil-containing grade is needed for self-lubricating heavy-duty service. Korea Ever-Power’s engineering team will confirm the best material for your specific operating conditions.<\/p>\n<\/div>\n

\n
\n

Can I test a gear prototype before committing to mould tooling?<\/p>\n

Yes \u2014 Korea Ever-Power provides handmade \/ machined custom gears so tests can be done before mould making. A single CNC-machined gear from POM or Nylon stock can be produced in days for functional testing in the application before the mould tooling investment is committed. This protects the customer from expensive mould rework if the tooth count, module, or face width needs adjustment after functional testing.<\/p>\n<\/div>\n

\n
\n

Do plastic gears require lubrication?<\/p>\n

Generally no \u2014 POM and MC Nylon plastic gears are self-lubricating and can run dry in clean environments at light-to-moderate loads. Where lubrication is required (higher loads, higher speeds), only non-polar synthetic hydrocarbon oils should be used. Standard petroleum oils containing polar additives must not be used \u2014 they cause swelling and deterioration of the plastic molecular chain under the pressure of gear tooth contact. Contact Korea Ever-Power<\/a> for lubrication advice for your specific application.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Customer Reviews<\/h2>\n
\n
\n

“We manufacture precision label printers and use POM spur gears from Korea Ever-Power in our paper feed and registration mechanisms. Module M0.5, Delrin 500P, 24T and 52T double gear set \u2014 6.5 g per piece. Dimensional inspection: tooth thickness \u00b10.008 mm across 50 pcs from one mould run. Noise at 30 cm: 28 dB(A) \u2014 9 dB lower than the metal gears previously used. Over 3 million feed cycles completed on life test without measurable wear increase.”<\/p>\n

Kim Jun-seo<\/strong>  |  Printer Mechanism Design Engineer, Incheon Digital Printing Systems Co.  ·  Q1 2026<\/em><\/p>\n<\/div>\n

\n

“We produce IP camera pan\/tilt heads and source POM M0.6 D-hole helical gears (16T, 0.95 g) from Korea Ever-Power. Tested prototype gear 2 days after sending drawing \u2014 confirmed fit and backlash before mould commitment. Mould production: 18 days. Production batch of 5,000 pcs: zero visual defects on 100% inspection, no short-shots, consistent shot weight 0.96 g \u00b10.01 g. Camera noise at full pan speed reduced to below ambient room level.”<\/p>\n

Lee Hyun-ji<\/strong>  |  Camera Module Design Engineer, Gyeonggi Security Systems Co.  ·  Q4 2025<\/em><\/p>\n<\/div>\n<\/div>\n

<\/p>\n

Related Products<\/h2>\n
\n
\"Plastic<\/a><\/p>\n
\n

Plastic Gears<\/h3>\n

POM, Nylon, UHMW-PE, MC Nylon \u2014 injection & machined.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n

\"Spur<\/a><\/p>\n
\n

Spur Gears<\/h3>\n

Steel, stainless spur gears \u2014 all modules.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n

\"Helical<\/a><\/p>\n
\n

Helical Gears<\/h3>\n

Steel helical gears for low-noise parallel drives.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n

\"Engrenages<\/a><\/p>\n
\n

Engrenages coniques<\/h3>\n

Bevel and spiral bevel gears for right-angle drives.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n

\"Worm<\/a><\/p>\n
\n

Worm Gears<\/h3>\n

Brass worm wheels, stainless worm gears, worm shafts.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n

\"Ring<\/a><\/p>\n
\n

Ring Gears<\/h3>\n

Aerospace, wind turbine, automotive ring gears.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n

\"Planetary<\/a><\/p>\n
\n

Planetary Gears<\/h3>\n

Ring gears, internal kits, planetary gear sets.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n

\"Other<\/a><\/p>\n
\n

Other Gears<\/h3>\n

Gear rack, auto, herringbone, hypoid, crown, forklift.<\/p>\n

Browse \u2192<\/a><\/div>\n<\/div>\n<\/div>\n

\n

Request a Quotation for Plastic Gears<\/h3>\n

POM (Duracon) and MC Nylon. M0.1\u2013M2.0 injection; up to M16 machined. Spur, helical, worm, bevel, pinion. Prototype before mould \u2014 tests before tooling commitment. Custom per drawing or sample.<\/p>\n

Get a Quote Now<\/a>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

Custom Plastic Gears from Korea Ever-Power \u2014 Hangzhou plastic gear manufacturer. POM, MC Nylon, PA66, PEEK, UHMWPE. ISO9001, SGS, FDA, RoHS certified. Custom size, colour, material. 24hr quote.<\/p>","protected":false},"featured_media":1743,"comment_status":"closed","ping_status":"open","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[4565],"product_tag":[],"class_list":["post-1742","product","type-product","status-publish","has-post-thumbnail","product_cat-plastic-geat","pa_editor-cxm","first","instock","product-type-simple"],"_links":{"self":[{"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/product\/1742","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/comments?post=1742"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/media\/1743"}],"wp:attachment":[{"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/media?parent=1742"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/product_brand?post=1742"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/product_cat?post=1742"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/gearrack.top\/fr\/wp-json\/wp\/v2\/product_tag?post=1742"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}