{"id":2154,"date":"2026-07-24T00:24:45","date_gmt":"2026-07-24T00:24:45","guid":{"rendered":"https:\/\/gearrack.top\/product\/good-tensile-strength-nylon-plastics-rack-for-sliding-gate\/"},"modified":"2026-07-24T00:25:32","modified_gmt":"2026-07-24T00:25:32","slug":"good-tensile-strength-nylon-plastics-rack-for-sliding-gate","status":"publish","type":"product","link":"https:\/\/gearrack.top\/fr\/product\/good-tensile-strength-nylon-plastics-rack-for-sliding-gate\/","title":{"rendered":"Good Tensile Strength Nylon Plastics Rack for Sliding Gate"},"content":{"rendered":"

<\/p>\n

\n

Good Tensile Strength Nylon Plastics Rack for Sliding Gate \u2014 Overview<\/h2>\n

Ever-Power good tensile strength nylon plastics racks for sliding gate<\/a> drives<\/strong> are injection-moulded and CNC-machined from engineering-grade nylon and plastic PA materials in modules 0.5 to 5.0, selected for the combination of tensile strength, impact resistance, and self-lubrication that sliding gate rack applications require. Tensile strength is the primary structural property that determines whether a rack tooth withstands the tangential force applied by the gate motor pinion \u2014 if the tangential load approaches the tooth bending stress limit, tooth fatigue failure occurs at the tooth root after a relatively small number of cycles. For residential gate drives at M4 PA66 with 20 mm face width, the safety factor on tooth bending stress under normal gate weight and wind loading is typically 3-5 \u2014 ensuring many years of reliable operation before tooth wear becomes the service-life limiting factor.<\/p>\n

The injection moulding capability covers PA6, PA66, PA66+GF, POM, ABS, Nylon, UPE, PE, TPE, PP, PC, PVC, PET, PMMA, PPS, PEEK, and PAI \u2014 allowing the same supplier to provide racks for applications ranging from standard residential gate drives in PA66 through to wash-down food-processing conveyor racks in POM or high-temperature industrial drives in PEEK. All specific sizes, colours, quantities, and materials are customized per customer drawing.<\/p>\n

\"good<\/p>\n

Technical Specifications<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nValue \/ Options<\/th>\n<\/tr>\n<\/thead>\n
Mat\u00e9riel<\/strong><\/td>\nAcrylic, PC, PVC, Nylon, PEEK, PU, PA, POM, PE, UPE, PTFE, and others<\/td>\n<\/tr>\n
Colour<\/strong><\/td>\nWhite, black, green, natural, blue, yellow, and customer-specified<\/td>\n<\/tr>\n
Diameter \/ Size<\/strong><\/td>\n5-200 mm, or customized per drawing<\/td>\n<\/tr>\n
Condition<\/strong><\/td>\nIn stock \/ made to order<\/td>\n<\/tr>\n
Shape<\/strong><\/td>\nPer customer drawing; also available as sheet, rod, tube, gear, rack, pulley, guide rail, and plastic fittings<\/td>\n<\/tr>\n
Certification<\/strong><\/td>\nISO 9001:2015, SGS, RoHS, test report<\/td>\n<\/tr>\n
Packing<\/strong><\/td>\nPlastic bags, cartons, wooden case, pallet, container<\/td>\n<\/tr>\n
Module (Short desc)<\/strong><\/td>\n0.5 to 5.0<\/td>\n<\/tr>\n
Injection Moulding Materials<\/strong><\/td>\nPA6, PA66, PA66+GF, POM, ABS, Nylon, UPE, PE, TPE, PP, PC, PVC, PET, PMMA, PPS, PEEK, PAI, and others<\/td>\n<\/tr>\n
Lead Time<\/strong><\/td>\nQuote within 24 hours; mould lead time 15-35 days depending on complexity<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Tensile Strength Comparison \u2014 Nylon Rack Grades for Sliding Gate<\/h2>\n

Tensile strength alone does not determine rack service life \u2014 impact toughness, elongation at break, and self-lubrication all matter equally. The table below compares the key mechanical properties of the nylon and plastic grades most commonly specified for sliding gate rack applications, to support correct material selection for different gate weights, cycle rates, and environments.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
Material Grade<\/th>\nTensile Strength<\/th>\nElongation at Break<\/th>\nFlexural Modulus<\/th>\nGate Drive Suitability<\/th>\n<\/tr>\n<\/thead>\n
PA6 (standard extruded)<\/strong><\/td>\n65-75 MPa<\/td>\n30-50%<\/td>\n2.5-3.0 GPa<\/td>\nGood \u2014 residential gate, light duty<\/td>\n<\/tr>\n
PA66 (standard extruded)<\/strong><\/td>\n75-85 MPa<\/td>\n20-40%<\/td>\n2.8-3.5 GPa<\/td>\nVery Good \u2014 residential and commercial gate<\/td>\n<\/tr>\n
MC Nylon \/ MC901 (cast)<\/strong><\/td>\n80-100 MPa<\/td>\n10-30%<\/td>\n3.0-4.0 GPa<\/td>\nExcellent \u2014 commercial and industrial gate, high-cycle<\/td>\n<\/tr>\n
PA66+GF30 (glass-fibre)<\/strong><\/td>\n150-180 MPa<\/td>\n3-5%<\/td>\n8-10 GPa<\/td>\nGood where stiffness needed; lower toughness<\/td>\n<\/tr>\n
POM Acetal<\/strong><\/td>\n60-70 MPa<\/td>\n15-40%<\/td>\n2.5-3.5 GPa<\/td>\nGood for wet\/wash-down gate environments<\/td>\n<\/tr>\n
UHMW-PE<\/strong><\/td>\n40-48 MPa<\/td>\n300-500%<\/td>\n0.5-0.9 GPa<\/td>\nLimited \u2014 very light gate only; very high impact<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Advantages of Nylon Racks for Sliding Gate Drives<\/h2>\n
\n
\n

✅ Good Tensile Strength<\/h3>\n

PA66 nylon provides 75-85 MPa tensile strength \u2014 adequate for residential gate tooth loads at M4 with a safety factor of 3-5 under normal gate weight and peak wind loading. MC nylon increases this to 80-100 MPa, extending the safety factor further and providing headroom for heavier commercial gates at the same module without requiring an upgrade to a larger module.<\/p>\n<\/div>\n

\n

🔈 Low Noise Operation<\/h3>\n

The nylon tooth surface absorbs mesh impact energy that a steel rack would transmit as structure-borne sound through the gate leaf and frame. A PA66 nylon rack against a steel gate motor pinion operates at 10-15 dB lower noise level than an equivalent steel rack at the same module and speed \u2014 a significant advantage for residential gates operating at night in quiet neighbourhoods.<\/p>\n<\/div>\n

\n

🌿 Outdoor Corrosion Immunity<\/h3>\n

Nylon does not rust or corrode in rain, frost, road salt, or coastal salt air. A nylon sliding gate rack survives 10-15 years outdoors without any surface treatment or periodic re-coating. UV-stabilised PA66 grades maintain surface colour and structural integrity in direct sunlight across the full outdoor service life of the gate installation.<\/p>\n<\/div>\n

\n

🔧 Self-Lubricating \u2014 Zero Maintenance<\/h3>\n

The self-lubricating PA66 nylon tooth surface eliminates the periodic grease application required for steel rack gate drives. Over a 15-year gate service life, this represents a significant reduction in maintenance calls and lubricant cost. No lubricant on the rack also means no grease contamination of the gate frame surface, gate motor housing, or gate hardware.<\/p>\n<\/div>\n<\/div>\n\n\n\n
\"plastic<\/td>\n\"CNC<\/td>\n\"self-lubrication<\/td>\n\"nylon<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Material of Plastic Gear Rack<\/h2>\n

Plastic racks can be made from a variety of materials. The traditional PR series uses MC nylon, while the PRF series adds end machining to connect multiple sections for long-travel drives. The polyacetal-based DRFD and DRFK series include mounting holes. The injection-moulded DR series has unique flexibility properties suitable for curved-path locations. The material selected depends on the daily cycle count, the required force, and the environment \u2014 moisture, chemical exposure, and temperature. Dimensional stability is critical for maintaining gear tooth contact ratio, tooth tip clearance, and overall geometry throughout the service life.<\/p>\n

Quality Assurance and Manufacturing<\/h2>\n

\"Ever-Power<\/p>\n

Ever-Power good tensile strength nylon sliding gate racks are produced under ISO 9001:2015 quality management. Mould steel materials include S136H, NAK80, 718H, SKD61, H13, and 420 grades for injection production. Incoming polymer is verified for grade conformance before production. Tooth geometry, pitch accuracy, and dimensional inspection are performed on every batch. SGS and RoHS documentation is available for regulated applications. Production video documentation is available on request before shipment.<\/p>\n

\n
\"Ever-Power<\/p>\n

ISO 9001:2015 and Quality Certificates<\/p>\n<\/div>\n

\n

Documentation with every order:<\/strong><\/p>\n