High Precision Nylon Plastic Gear Rack and Pinion | OEM Manufacturer

Name: High Precision Nylon Plastic Gear Rack and Pinion | OEM Manufacturer - Korea High Precision Nylon Plastic Gear Rack and Pinion | OEM Manufacturer Manufacturers, Suppliers - gear rack
SKU: 235afc095527

Ever-Power high precision nylon plastic gear rack and pinion sets are CNC-machined matched pairs engineered for applications where standard catalogue plastic racks are inadequate in tooth accuracy or service life. Rack and pinion are machined and test-rolled together as a matched set before shipment — contact pattern, backlash, and noise level are all verified. Available in PA66, MC nylon, POM acetal, and UHMW-PE; modules M1 through M8; custom modules, non-standard cross-sections, and hole patterns per drawing. Sections are joined with precision half-tooth machined ends for unlimited-stroke long-travel drives. ISO 9001:2015 certified — material datasheet and dimensional inspection report with every order.

COD: 235afc095527 Categoria: Plastic Gear Racks

Richiedi informazioni ora

Descrizione
Informazioni aggiuntive

High Precision Nylon Plastic Gear Rack and Pinion — Overview

Ever-Power high precision nylon plastic gear racks are specified when standard catalogue plastic racks fall short in tooth accuracy or service life. The rack and matching pinion are CNC-machined together to a common specification — not assembled from independently inspected parts — and test-rolled before shipment to verify contact pattern, backlash, and noise level as a matched pair. This matched-set approach eliminates the field-fitting time and uncertainty that arises when rack and pinion are sourced separately.

Gear racks are the preferred linear motion solution for machine tools and transportation equipment whenever the application requires transmitting substantial forces over unlimited stroke length. Compared with ball screws, the main advantage of the rack is that heavier loads can be accommodated simply by specifying a larger module, and there is no stroke length limitation — sections are precision-joined end-to-end with half-tooth machined ends that maintain correct pitch across every joint. The principal trade-off is a higher inherent backlash, which can be reduced to near-zero through a spring-loaded pinion arrangement or controlled centre-distance setting for precision servo applications.

high precision nylon plastic gear racks and pinion set OEM manufacturer

Specifiche tecniche

Parameter	Value / Options
Modulo	M1 through M8 standard; custom modules per drawing
Tooth Profile	Spur (straight tooth) standard; helical on request
Pressure Angle	20° standard; 14.5° per drawing
Material — Rack	PA66 nylon, MC nylon (MC901), POM acetal, UHMW-PE; or per drawing
Material — Pinion	Steel (40Cr / 42CrMo); stainless steel; matched nylon; per drawing
Matched Set Supply	Rack and pinion test-rolled together; backlash, contact pattern, and noise level verified before shipment
Section Length	Up to 1,000 mm per section; half-tooth machined ends for unlimited butted travel
Accuracy	DIN 7-9 standard; tighter tolerance per drawing on request
Lubrication	Self-lubricating (dry run standard); oil or grease optional at higher load
Certificazione	ISO 9001:2015; material datasheet and dimensional inspection report with every order

Plastic Gear Rack vs Ball Screw — When to Choose Each

The main applications of racks are machine tools and transportation equipment, and when the application involves transmitting linear motion they are often compared with ball screws. The main advantage of the rack is that heavier loads can be met by using a larger module, and there is no length limitation by joining sections to the end of the finished product. The principal trade-off is backlash — present in any standard rack and pinion but controllable in precision applications.

Criterion	Nylon Gear Rack and Pinion	Ball Screw
Maximum stroke	Unlimited — precision half-tooth butted sections	Limited by screw critical speed; typically below 4-6 m
Load capacity	Scalable by upsizing module; plastic racks up to ~1.5 kN (MC nylon)	Moderate; limited by ball size and nut length
Backlash	Present; reducible with spring-loaded pinion or precise centre-distance control	Near-zero with preload nut
Noise level	Very low — polymer absorbs mesh impact energy	Low but audible ball recirculation at higher speeds
Corrosion resistance	Excellent — polymer immune to moisture and chemicals	Requires lubrication and protective seals
Cost at long stroke	Lower — machined polymer bar; no support bearings required	Higher — long screws require intermediate support bearings
Maintenance	Minimal — self-lubricating; periodic inspection only	Periodic grease replenishment required
Choose when	Stroke above 2 m; corrosive or contamination-sensitive environment; noise limit critical	Stroke below 2 m; sub-0.01 mm repeatability required at light to moderate load

Material of Plastic Gear Rack

Plastic racks can be made from a variety of materials. The traditional PR series uses MC nylon, while the PRF series adds end machining to connect multiple rack sections for long-travel drives. The polyacetal-based DRFD and DRFK series include mounting holes. The injection-moulded DR series has unique flexibility properties suitable for curved-path locations. The material selected for the rack will depend on the daily gear cycle count, the required force, and the operating environment — including moisture, chemical exposure, and temperature range. Dimensional stability is critical for maintaining gear tooth contact ratio, tooth tip clearance, and overall geometry. POM and UHMW-PE are the most dimensionally stable grades in humid or wet environments.

nylon CNC plastic gear rack wear resistant rack pinion

flexible gear rack and pinion high precision polyamide nylon PA66 plastic gear rack

CNC nylon rack plastic MC901 gear rack for sliding gate

injection molding wear-resistant corrosion resistant MC nylon PA66 plastic gear rack

Quality Assurance and Manufacturing

precision measuring equipment for nylon gear rack inspection

Ever-Power high precision nylon gear racks are produced under ISO 9001:2015 quality management. All racks are CNC-machined on high-precision 3-axis CNC and CNC milling machines. Tooth geometry is inspected by profile projector and gear tooth calliper. Where rack and pinion sets are ordered, the matched pair is tested together on a gear roll-test machine — contact pattern, backlash, and noise level are verified and recorded before shipment. Every order ships with material datasheet, dimensional inspection record, and (for matched sets) a roll-test report.

Ever-Power ISO 9001 quality certifications

ISO 9001:2015 and Quality Certificates

Documentation with every order:

Material datasheet — polymer grade, mechanical properties, operating limits
Dimensional inspection record — tooth pitch, face width, section length, straightness
Roll-test report (matched sets) — backlash, contact pattern, noise level

Related Gear Products

Ever-Power manufactures the complete range of industrial gear types alongside plastic racks. Matched plastic gears, steel spur pinions, steel gear racks, and all gear types are available from the same source.

Plastic Gears

Nylon and POM pinions for all-plastic, lubrication-free rack and pinion drives.

View Products

steel spur gear pinion for plastic nylon gear rack

Ingranaggi cilindrici

Steel spur pinions to mesh with nylon racks — the most common paired configuration.

View Products

helical gear for rack drive reducer stage

Ingranaggi elicoidali

Helical pinions for quieter, higher-load rack drives and speed reducer stages.

View Products

Planetary Gear Sets

Compact reducers for servo motor to pinion shaft in precision plastic rack drives.

View Products

bevel gear right angle drive for rack system

Ingranaggi conici

Right-angle drive stages for compact gear motor input to the rack pinion shaft.

View Products

Worm Gear Wheels

Self-locking worm reducers for vertical rack axes holding position without a motor brake.

View Products

ring gear for large rotary and slewing drives

Corone dentate

Large-diameter ring gears for rotary kilns, slewing drives, and large machinery.

View Products

Domande frequenti

What makes a nylon gear rack "high precision" compared to a standard one?

A high precision nylon rack has been CNC-machined to tighter tooth profile and pitch tolerances than a standard milled or injection-moulded rack. The key measured parameters are pitch deviation — the difference between actual and theoretical tooth spacing, cumulative over the rack length — and tooth form error, the deviation of the actual flank from the theoretical involute profile. Tight values on both parameters reduce transmission error, which manifests as vibration, noise, and periodic positioning error. For drives requiring smooth motion and position accuracy better than 0.5 mm per stroke, a high-precision CNC-machined nylon rack is the correct specification.

How do I reduce backlash in a nylon plastic gear rack drive?

The two practical methods for plastic rack drives are: (1) spring-loaded pinion — the pinion housing is spring-loaded to push the pinion radially toward the rack, eliminating tooth-flank clearance at light loads; and (2) precise centre-distance control — setting the pinion-to-rack centre distance at the nominal value with no additional clearance. Note that a zero-clearance preloaded arrangement suitable for a steel rack will generate excessive contact stress on a nylon tooth — always allow 0.1-0.2 mm backlash for standard plastic rack duty and compensate for it in the motion controller if tighter positioning is needed.

Can you supply rack and pinion as a tested matched set?

Yes. Ever-Power supplies both individual racks and complete matched sets including the pinion with bore to suit your drive shaft. Matched sets are test-rolled together on a gear roll-test machine before shipment — contact pattern and backlash are verified as a pair, not as two independently inspected components that may not mesh correctly in the field. For standard module applications, pinions are available from stock; for custom modules or non-standard tooth counts, the pinion is produced alongside the rack order with the same material specification.