Durable CNC Precision Machining Custom Nylon PA6 Plastic Rack Gear
Ever-Power durable CNC precision machined nylon PA6 plastic rack gears are manufactured from 100% virgin PA6 nylon raw material with a density of 1.2 g/cm2 using CNC precision machining. PA6 delivers good tensile strength, high impact and notching impact strength, high heat deflection temperature, good glide and self-lubrication, chemical stability against organic solvents and fuels, and thermal aging resistance across -50C to +110C. Humidity-induced size variation must be considered in precision applications. Custom modules, lengths, and cross-sections per your drawing. ISO 9001:2015 certified; dimensional inspection report with every order.
Durable CNC Custom Nylon PA6 Plastic Rack Gear — Overview
Ever-Power durable CNC nylon PA6 plastic rack gears are precision-machined from 100% virgin nylon PA6 material on CNC milling and hobbing machines. PA6 (polyamide 6) is the most widely used engineering nylon grade for gear rack applications — it delivers the right balance of mechanical properties, cost, machinability, and chemical resistance for the majority of industrial linear drive applications at light to moderate load. Every rack is custom-dimensioned to your drawing: module, length, face width, cross-section thickness, and hole pattern are all variable without tooling cost, making CNC-machined PA6 racks the most practical and cost-effective solution for custom OEM gear rack applications at any quantity from single prototypes to production volumes.
PA6 made from 100% virgin raw material delivers the most consistent mechanical properties batch-to-batch. Recycled or regrind PA6 has lower and more variable molecular weight, which reduces tensile strength, impact resistance, and fatigue life — properties that matter directly for gear rack tooth performance. Ever-Power uses only virgin PA6 for gear rack production to ensure that the tooth strength and dimensional stability are consistent across every order and every batch.
Specifiche tecniche
| Parameter | Value / Options |
|---|---|
| Shape | Rack gear (linear) |
| Materiale | Nylon PA6 (100% virgin raw material) |
| Material Density | 1.2 g/cm² |
| Processing | CNC precision machining |
| Modulo | M1 to M8 standard; custom modules per drawing |
| Tolleranza | Per drawing specification; standard DIN 7-9 |
| Operating Temp. | -50°C to +110°C |
| Lubrication | Self-lubricating; size variation due to humidity absorption must be considered |
| Section Length | Up to 1,000 mm; half-tooth machined ends for butted long-travel drives |
| Certificazione | ISO 9001:2015; dimensional inspection report with every order |
Nylon PA6 Properties — Performance in Gear Rack Applications
The following properties are characteristic of 100% virgin nylon PA6 and determine its suitability for each gear rack application. Where a property has specific implications for rack design or installation, the significance column describes what action or consideration is required.
| PA6 Property | Value / Level | Significance for Rack Gear Applications |
|---|---|---|
| Tensile strength | 65-75 MPa | Adequate for light-to-moderate tooth loads at M3-M6 |
| Impact strength (notched) | 4-6 kJ/m² | Good toughness; sufficient for most conveyor and gate drives |
| Heat deflection temperature | 55-65°C (unfilled) | Suitable for ambient temperature drives; avoid sustained elevated load above 60°C |
| Strength and stiffness | Moderate | Good dimensional rigidity for rack body under bending |
| Glide / self-lubrication | Good | Low friction against steel pinion; lubrication-free operation |
| Chemical stability | Good vs solvents/fuels | Suitable for agricultural and general industrial environments |
| Thermal aging resistance | -50°C to +110°C | Full outdoor temperature range without embrittlement |
| Humidity absorption | 3-4% at saturation | Allow 0.3% length change per 1% moisture uptake in humid environments |
CNC Precision Machining vs Conventional Methods
All Ever-Power custom PA6 nylon racks are CNC precision machined — not conventionally milled or injection moulded. The table below shows the practical differences between these production methods for custom gear rack applications, explaining why CNC machining is the standard for OEM custom rack production.
| Criterion | CNC Precision Machining | Conventional Milling / Injection Moulding |
|---|---|---|
| Tooth profile accuracy | DIN 7-9 or tighter; consistent batch-to-batch | Variable; dependent on cutter wear and setup |
| Custom dimensions | Any module, length, thickness, hole pattern | Limited to available tooling or mould |
| Surface finish | Ra 1.6-3.2 μm on tooth flanks | Ra 3.2-6.3 μm typical |
| Tooling cost | None — machined directly from bar stock | High (injection mould); low (milling but limited accuracy) |
| Minimum order | One piece — suitable for prototyping | High minimum for injection moulding |
| Lead time | 7-14 working days | 4-8 weeks (mould), 3-5 days (conventional milling) |
| Repeatability | High — CNC program repeats exactly | Moderate — setup variation between batches |
Applicazioni
⚙ Machinery Wear Part Replacement
PA6 nylon racks widely replace wearing parts in mechanical equipment and substitute for copper and alloy components as wear elements, including shaft sleeves, bearing bushes, bushings, lining plates, and wear plates. The combination of good mechanical properties, low friction, and easy machinability makes PA6 the preferred replacement material for worn metal components where weight reduction or corrosion resistance is a secondary benefit.
🌿 Sliding Gate and Door Drives
Custom PA6 nylon racks for residential and light commercial sliding gate drives. The -50°C to +110°C operating temperature range covers all outdoor climates without embrittlement or softening. Self-lubrication eliminates the maintenance schedule required for steel rack gate systems. Module M4 standard for residential duty; M6 for heavier commercial gates.
🏭 General Industrial Linear Drives
Worm gears, roller guide rails, piston rings, sealing components, sliders, ball bowls, impellers, vanes, cams, nuts, valve plates, pipes, stuffing boxes, pulleys, and pump rotors are all standard PA6 nylon applications alongside gear racks. CNC precision machining allows all these components to be produced from the same PA6 material in a single production facility to consistent dimensional standards.
 |
 |
 |
 |
Material of Plastic Gear Rack
Plastic racks can be made from a variety of materials. The traditional PR series uses MC nylon, while the PRF series adds end machining to connect multiple sections for long-travel drives. The polyacetal-based DRFD and DRFK series include mounting holes. The injection-moulded DR series has unique flexibility properties suitable for curved-path locations. The material selected depends on the daily cycle count, the required force, and the environment — moisture, chemical exposure, and temperature. Dimensional stability is critical for maintaining gear tooth contact ratio, tooth tip clearance, and overall geometry throughout the service life.
Quality Assurance and Manufacturing
Ever-Power PA6 nylon gear racks are produced under ISO 9001:2015 quality management. All PA6 bar stock is verified as 100% virgin material by density check and material certificate before entering CNC machining. Tooth geometry, pitch, cross-section dimensions, and straightness are inspected on every batch. Every order ships with material datasheet and dimensional inspection report as standard.
ISO 9001:2015 and Quality Certificates
Documentation with every order:
- Virgin PA6 material verification — density (1.2 g/cm²) and material certificate
- Dimensional inspection — tooth pitch, face width, thickness, straightness per drawing
- Batch inspection record and packing list with part number and quantity
Related Gear Products
Ever-Power manufactures the complete range of industrial gear types alongside plastic racks. Matched plastic gears, steel spur pinions, steel gear racks, and all gear types are available from the same source.
Plastic Gears
Nylon and POM pinions for all-plastic, lubrication-free rack and pinion drives.
Ingranaggi cilindrici
Steel spur pinions to mesh with nylon racks — the most common paired configuration.
Ingranaggi elicoidali
Helical pinions for quieter, higher-load rack drives and speed reducer stages.
Planetary Gear Sets
Compact reducers for servo motor to pinion shaft in precision plastic rack drives.
Ingranaggi conici
Right-angle drive stages for compact gear motor input to the rack pinion shaft.
Worm Gear Wheels
Self-locking worm reducers for vertical rack axes holding position without a motor brake.
Corone dentate
Large-diameter ring gears for rotary kilns, slewing drives, and large machinery.
Domande frequenti
Why is 100% virgin PA6 important for gear rack tooth performance?
Recycled or regrind PA6 has lower and less consistent molecular weight than virgin material — the recycling and re-extrusion process breaks polymer chains, reducing tensile strength, impact resistance, and fatigue life. For a gear rack tooth under cyclic bending load, lower molecular weight directly reduces the number of cycles before fatigue crack initiation at the tooth root. Ever-Power uses only 100% virgin PA6 bar stock for gear rack production, verified by density measurement and material certificate before entering CNC machining, to ensure consistent tooth strength across all orders.
How much does PA6 nylon change size with humidity absorption?
PA6 absorbs approximately 3-4% moisture at saturation equilibrium in a water-immersion test, but only 1.5-2.5% at typical indoor relative humidity of 50-65%. In practice, this means a 1,000 mm PA6 rack will grow approximately 3-4 mm from dry condition to full saturation — but in normal indoor industrial environments will stabilise at 1.5-2.5 mm growth above its as-machined dimension. For outdoor applications in wet climates, allow for this growth in the joint gap between butted sections (0.5-1.0 mm at each joint) and in the rack-to-housing clearance. If dimensional stability in wet conditions is critical, specify POM acetal instead of PA6 — POM absorbs below 0.2% moisture under any conditions.
What is the practical tooth load limit for a PA6 nylon rack at module M4?
A PA6 nylon rack at module M4 with 20 mm face width sustains a tangential tooth load of approximately 300-500 N before the tooth stress approaches the material fatigue limit at moderate cycle counts. At very high cycle counts — above 1 million cycles — reduce the working load to approximately 60% of this figure to extend rack life to the expected service interval. For loads above 500 N at M4, specify MC nylon instead of PA6 — its higher tensile strength and impact toughness increase the allowable tooth load by approximately 30-40% at the same module and face width.
Request a Quotation for Custom Nylon PA6 Rack Gears
Specify your module, PA6 grade, section length, thickness, and drawing. We return a price within 24 hours. All dimensions custom — no tooling cost.
Informazioni aggiuntive
| Redattore |
|---|
Prodotti correlati
-
Self-Lubrication Flexible MC Nylon Gears Rack | Plastic Nylon66 Gear Rack
-
Factory Plastic Rack Gear | Customized Nylon Gear Rack OEM Hobbing
-
Good Tensile Strength Nylon Plastics Rack for Sliding Gate
-
Engineering Plastic Injection Nylon Plastic Gear Rack | Low Noise Plastic Rack
-
CNC Nylon Rack Plastic MC901 Gear Rack | Sliding Gate OEM Supply
-
Nylon Gear Rack | Plastic Gear Rack, Custom OEM Manufacturer Machining
-
Customized Plastic or Stainless Steel Straight Pinion Plastic Gear Rack
-
High Precision Nylon Plastic Gear Rack and Pinion | OEM Manufacturer
Italian 
English 
Korean 
French 
Japanese